Bloque de cambio rápido Quintus
3 sizes, with or without zero point clamping system
The QUINTUS rapid change block provides the optimum interface for your machine tool. A mechanical zero point clamping system (figure 1) allows rapid and precise changing of different clamping systems taking account of the zero point. A further benefit results from the additional elevation of the clamping system on the machine table. The systems Quintus are ground in the height and hardened all-round.
When the clamping system is not changed on the machine table, we recommend the system Quintus without mechanical zero point clamping system (figure 2).
This means that machining tasks can be prepared externally and can then be changed without long machine downtimes. Handling is made easier and set-up and production costs are reduced. For cost-conscious users, we offer a version without zero point clamping system.
Special benefits
- quick and zero-point precise setup
- collision-free tool paths
- mechanical integrated zero point clamping system
- increased flexibility and increased machine running times
- 3 sizes in 2 variants for the series MC and SCS
Referencia | Datos CAD | |
---|---|---|
Referencia
|
||
Referencia
|
Propiedades
| |
Referencia
|
Propiedades
| |
Referencia
|
Propiedades
| |
Referencia
|
Propiedades
| |
Referencia
|
Propiedades
| |
Referencia
|
Propiedades
|
Referencia | Datos CAD | Descripción |
---|---|---|
Referencia
|
Descripción
Socket SW8
for torque wrench
as per data sheet WS5.6150
|
|
Referencia
|
Descripción
Set of clamping claws M10 (4 off)
as per data sheet WS5.3570
|
|
Referencia
|
Descripción
Set of clamping claws M12 (4 off)
as per data sheet WS5.3570
|
|
Referencia
|
Descripción
Set of clamping claws M12 (4 off)
as per data sheet WS5.6150
|
|
Referencia
|
Descripción
Torque wrench
torque: 20 – 120 Nm
with reversible ratchet and square 1/2"
with ball lock
*as per data sheet WS 3.3660
|
|
Referencia
|
Descripción
Positioning pin Ø 10/12 mm
as per data sheet WS5.450Z
|
|
Referencia
|
Descripción
Positioning pin Ø 25/12 mm
as per data sheet WS5.450Z
|
|
Referencia
|
Descripción
Centring bolt for hub centring
diameter: 30 mm g6
as per data sheet WS 5.6150
|
|
Referencia
|
Descripción
Centring bolt for hub centring
diameter: 32 mm g6
as per data sheet WS 5.6150
|
|
Referencia
|
Descripción
Centring bolt for hub centring
diameter: 50 mm g6
as per data sheet WS 5.6150
|
Aproveche nuestra zona de login gratuita:
- Descarga de datos CAD
- Descarga de instrucciones de servicio
¡Bienvenido de nuevo! Inicie sesión con su cuenta de usuario ya existente.'