Fixture clamp, concentric clamping

max. clamping force 6.5 and 9 kN
jaw width 40 and 65 mm
double acting
max. operating pressure 250 bar

Downloads

Catalogue sheet

DE EN FR ES IT

Operating instructions

Information Series

Description

I 4.120 Fixture Clamp, concentric clamping

Application
The fixture clamps are used for machining of dimensionally stable workpieces in single or multiple clamping fixtures.
Due to their compact design they can be arranged in a very limited space. Fixture clamps are especially suitable for series manufacturing
in automated mode.
The double-acting cylinder function combined with central lubrication and good swarf protection guarantees a high process safety.

Description
The fixture clamp with concentric clamping function consists of a very slim basic body with 2 integrated hydraulic cylinders.
The piston forces are transfered via a guided connecting link to the two clamping slides so that a centric synchronism is obtained. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space. If fixing from below is not possible an adaptor plate for manifold mounting or tube connection is available.
As accessory also blanks of clamping jaws are available for adaptation to the workpiece contour.

Important notes
The fixture clamp is only suitable for exterior clamping.
Lubricate at the latest after 500 clamping cycles the clamping slide via the central lubrication. Never use the complete clamping stroke to guarantee safe clamping of the workpiece.

Max. operating temperature 80 °C
Operating conditions and other data see data sheet A 0.100

Products (2)

Number

Item no.	CAD data	functioning	max. operating pressure [bar]	seals	hydraulic ports
Item no. 4413051	CAD data	functioning double acting	max. operating pressure [bar] 250	seals NBR	hydraulic ports pipe thread and manifold connection with O-ring	Properties
Item no. 4413151	CAD data	functioning double acting	max. operating pressure [bar] 250	seals NBR	hydraulic ports pipe thread and manifold connection with O-ring	Properties

Accessories (10)

Number

Item no.	CAD data	Description
Item no. 0441305	CAD data	Description Adaptor plate for fixture clamp 4413-051/-080 max. 250 bar, as per data sheet I4.120
Item no. 0441315	CAD data	Description Adaptor plate for fixture clamp 4413-151 max. 250 bar, as per data sheet I4.120
Item no. 3001842	CAD data /	Description O-ring 5 x 1 mm - NBR as per data sheet I4.120
Item no. 3300225	CAD data /	Description Socket head cap screw M6 x 20 mm - 8.8 as per data sheet I4.120
Item no. 3300625	CAD data /	Description Socket head cap screw M8 x 25 - 12.9 as per data sheet I4.111
Item no. 3301107	CAD data	Description Socket head cap screw M6 x 16 - 12.9 as per data sheet I4.120
Item no. 3301263	CAD data	Description Socket head cap screw M8 x 20 mm, 8.8, galvanized as per data sheet B1.7441
Item no. 3548070	CAD data	Description Clamping jaw 40 mm version: Clamping jaw (blank) material: 16 MnCr5 soft as per data sheet I4.120
Item no. 3548080	CAD data	Description Clamping jaw 65 mm version: Clamping jaw (blank) material: 16 MnCr5 soft as per data sheet I4.120
Item no. 9210132	CAD data	Description Plug-type connector ND5 - Ø10 x 14 mm short version, with FKM seals max. 500 bar, as per data sheet F9.300

Application examples

Fixture clamp, concentric clamping

Concentric clamping of 8 flanges on a rotary indexing fixture.