Workholding
Contact
Series
B1.8262

Mini hinge clamp 120 bar

with metallic wiper edge
double acting,
max. operating pressure 120 bar
Mini hinge clamp 120 bar
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.8262 Mini hinge clamp

Application
The mini hinge clamp is a low-cost hydraulic clamping element for thinwalled workpieces and reduced space. The special kinematics allow clamping nearly without side loads of workpieces which are very sensitive against deformation. A clamping recess in the workpiece a little bit wider than the clamping lever is sufficient as clamping surface.
This line is designed for the direct connection to the machine hydraulics with a max. operating pressure of 120 bar.

Description
When pressurising the element, the piston moves upwards and swivels the clamping lever over the hinges forwards and at the same time downwards onto the workpiece. The piston force is deviated by 180° and is available as clamping force with virtually no loss of efficiency. During unclamping the clamping lever with swivel contact bolt will be swivelled behind the front edge of the flange, thereby unimpeded loading and unloading of the workpiece is possible. Workpieces which are very sensitive against deformation are clamped nearly without cross loads, if the clamping surface is at the height of the bearing pins of the clamping lever (34 mm above the flange surface). 
The optionally available long clamping lever is provided for customer-specific adaptations.

Products (3)
Loading…
body design
cartridge type (3)
clamping stroke [mm]
3 (3)
type
mini hinge clamp (3)
functioning
double acting (3)
max. operating pressure [bar]
120 (3)
seals
FKM (3)
hydraulic ports
for drilled channels (3)
position monitoring
without (3)
pressure range
low pressure (3)
clamping lever
extended piston rod
without (3)
max. clamping force [kN]
2.3 (3)
metallic wiper edge
with (3)
Item no. CAD datatypefunctioningmax. operating pressure [bar]seals
Item no.
CAD data
type
mini hinge clamp
functioning
double acting
max. operating pressure [bar]
120
seals
FKM
Properties
Item no.
CAD data
type
mini hinge clamp
functioning
double acting
max. operating pressure [bar]
120
seals
FKM
Properties
Item no.
CAD data
type
mini hinge clamp
functioning
double acting
max. operating pressure [bar]
120
seals
FKM
Properties
Loading…
Item no.
type
mini hinge clamp
functioning
double acting
max. operating pressure [bar]
120
seals
FKM
hydraulic ports
for drilled channels
body design
cartridge type
position monitoring
without
pressure range
low pressure
clamping lever
without clamping lever
clamping stroke [mm]
3
extended piston rod
without
max. clamping force [kN]
2.3
metallic wiper edge
with
Item no.
type
mini hinge clamp
functioning
double acting
max. operating pressure [bar]
120
seals
FKM
hydraulic ports
for drilled channels
body design
cartridge type
position monitoring
without
pressure range
low pressure
clamping lever
clamping lever with contact bolt
clamping stroke [mm]
3
extended piston rod
without
max. clamping force [kN]
2.3
metallic wiper edge
with
Item no.
type
mini hinge clamp
functioning
double acting
max. operating pressure [bar]
120
seals
FKM
hydraulic ports
for drilled channels
body design
cartridge type
position monitoring
without
pressure range
low pressure
clamping lever
long clamping lever, unmachined
clamping stroke [mm]
3
extended piston rod
without
max. clamping force [kN]
2.3
metallic wiper edge
with