Fixture clamp with fixed jaw

Articles and prices on request

max. clamping force 9.5 kN
jaw width 40 mm
double acting
max. operating pressure 250 bar

Downloads

Catalogue sheet

EN DE ES FR IT

Operating instructions

Information Series

Description

I 4.110 Fixture clamps with fixed jaw

Application
The fixture clamps are used for machining of dimensionally stable workpieces in single or multiple clamping fixtures.
Due to their compact design they can be arranged in a very limited space.
Fixture clamps are especially suitable for series manufacturing in automated mode.
The double-acting cylinder function combined with central lubrication and good swarf protection guarantees a high process safety.

Description
The fixture clamp with fixed jaw consists of a very small basic body with integrated hydraulic cylinder which actuates the movable jaw.
All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space.
If fixing from below is not possible an adaptor plate for manifold mounting or tube connection is available. As accessory also blanks of clamping jaws are available for adaptation to the workpiece contour.
The fixed jaw can be equipped with a pneumatic seat control.

Important notes
The fixture clamp is only suitable for exterior clamping.
Lubricate at the latest after 500 clamping cylces the clamping slide via the central lubrication. Never use the complete clamping stroke to guarantee safe clamping of the workpiece.
Max. operating temperature 80 °C.
Operating conditions and other data see data sheet A 0.100.

Products (2)

Article available on request

On request, we will check whether the article is still available

Number

Item no.	CAD data	functioning	max. operating pressure [bar]	seals	hydraulic ports
Item no. 4413001	CAD data	functioning double acting	max. operating pressure [bar] 250	seals NBR	hydraulic ports pipe thread and manifold connection with O-ring	Properties
Item no. 4413031	CAD data	functioning double acting	max. operating pressure [bar] 250	seals NBR	hydraulic ports pipe thread and manifold connection with O-ring	Properties

Accessories (9)

Article available on request

On request, we will check whether the article is still available

Number

Item no.	CAD data	Description
Item no. 0441300	CAD data	Description Adaptor plate for fixture clamp 4413-001 max. 250 bar, as per data sheet I4.110
Item no. 0441303	CAD data	Description Adaptor plate for fixture clamp 4413-031 max. 250 bar, as per data sheet I4.110
Item no. 3000275	CAD data /	Description O-ring 8 x 1.5 mm, FKM as per data sheet B1.5091
Item no. 3001842	CAD data /	Description O-ring 5 x 1 mm - NBR as per data sheet I4.120
Item no. 3300225	CAD data /	Description Socket head cap screw M6 x 20 mm - 8.8 as per data sheet I4.120
Item no. 3301107	CAD data	Description Socket head cap screw M6 x 16 - 12.9 as per data sheet I4.120
Item no. 3548070	CAD data	Description Clamping jaw 40 mm version: Clamping jaw (blank) material: 16 MnCr5 soft as per data sheet I4.120
Item no. 3548071	CAD data	Description Fixed jaw 40 mm version: Clamping jaw (blank) material: 16 MnCr5 soft as per data sheet I4.110
Item no. 9210132	CAD data	Description Plug-type connector ND5 - Ø10 x 14 mm short version, with FKM seals max. 500 bar, as per data sheet F9.300

Application examples

Fixture clamp with fixed jaw combined with a position flexible fixture clamp

Clamping fixture for a pedal of a commercial vehicle.