Workholding
Contact
Series
B1.9472

Threaded-Body Work Supports

Articles and prices on request
with metallic wiper edge, shaft length 20 – 100 mm,
single and double acting, max. operating pressure 70 bar
Threaded-Body Work Supports
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.9472 Threaded-Body Work Supports

Hydraulic work supports are used to provide a self-adjusting rest for workpieces and avoid their vibration and deflection under machining loads.
This series offers high support forces already at 70 bar and can directly be connected to the low-pressure hydraulics of the machine tool.
The selectable extension with a shaft diameter of only 16 mm enables the support of surfaces in recesses and cavities that otherwise would be inaccessible.
In case of the double-acting version, the return stroke of the support plunger is effected in a precisely defined time, that is above all advantageous in cycle-dependent installations.

The support plunger is hydraulically extended and retracted by means of a small single or double-acting cylinder. Contact to the workpiec  is made by spring force. The pressure spring can be easily exchanged. The support plunger is additionally guided in the area of the shaft diameter and can therefore absorb side loads up to 300 N.

The support plunger is retracted in off-position. When pressurised, the piston of the single or double-acting cylinder extends against an internal stop and the support plunger contacts the already clamped workpiece with spring force.
With continuing pressure increase, the conical hydraulic piston moves downwards. The support plunger will be radially locked by the slotted locking bush using a low-friction spherical shell and can then absorb load forces in axis direction.
For unclamping, hydraulic pressure will be released. The conical hydraulic piston is pushed upwards by spring force, whereby the locking of the support plunger disengages.
The single-acting piston retracts the support plunger with spring force to its off-position. This takes place quicker with the double-act-ing version. 

Products (13)
Article available on request
On request, we will check whether the article is still available
Loading…
functioning
max. operating pressure [bar]
70 (13)
seals
NBR (13)
hydraulic ports
for drilled channels (13)
body design
threaded-body type M26 (13)
position monitoring
without (13)
pressure range
low pressure (13)
wiper
FKM with metallic wiper edge (13)
venting of the spring area
self-locking
without (13)
bolt type
with contact bolt (13)
min. operating pressure [bar]
25 (13)
max. operating temperature [°C]
70 (13)
off-position
extending
hydraulic (13)
return
contact
with spring force (13)
plunger Ø [mm]
10 (13)
max. load force [kN]
3 (13)
plunger stroke [mm]
6.5 (13)
max. flow rate [cm3/s]
- (13)
spring contact force [N]
3,7-9,5 (13)
pneumatic contact force [N/bar]
- (13)
elastic deformation [µm/kN]
- (13)
Item no. CAD datafunctioningmax. operating pressure [bar]sealshydraulic ports
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
Properties
Loading…
Item no.
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
single acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
without
extending
hydraulic
return
hydraulic
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
without
extending
hydraulic
return
hydraulic
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
without
extending
hydraulic
return
hydraulic
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
without
extending
hydraulic
return
hydraulic
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
without
extending
hydraulic
return
hydraulic
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Item no.
functioning
double acting
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M26
position monitoring
without
pressure range
low pressure
wiper
FKM with metallic wiper edge
venting of the spring area
without
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
25
max. operating temperature [°C]
70
off-position
without
extending
hydraulic
return
hydraulic
contact
with spring force
plunger Ø [mm]
10
max. load force [kN]
3
plunger stroke [mm]
6.5
max. flow rate [cm3/s]
-
spring contact force [N]
3,7-9,5
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
-
Accessories (3)
Article available on request
On request, we will check whether the article is still available
Item no. CAD data Description
Item no.
CAD data
/
Description
Seal kit, external seals for - NBR for work supports 1947110XXXXXXX (double acting) as per data sheet B1.9472
Item no.
CAD data
/
Description
O-ring 10.82 x 1.78 mm as per data sheet B1.9472
Item no.
CAD data
/
Description
O-ring 21.95 x 1.78 mm as per data sheet B1.9470
Loading…