Series
B1.8310
Electric Swing Clamps
top flange, with position and clamping force monitoring
DC voltage 24 V, minimum energy demand
DC voltage 24 V, minimum energy demand
Information Series
Description
B 1.8310 Electric swing clamp
The electric swing clamp is driven by a brushless DC motor.
The motor speed is transformed by means of a gear and a threaded spindle into the swing and stroke movement of the piston rod.
For swinging the clamping arm by 180°, an axial stroke of only 3 mm is required.
If the clamping arm collides during the swing motion with a workpiece, the mechanism is protected against overload. The direct current motor is automatically and immediately switched off.
When unclamping, the clamping arm always swings back to the off-position.
Power supply
For motor and electronic control a DC voltage of 24 V with a residual ripple of max. 10 % is required. For the DC motor, we recommend the use of a switching power supply with a current output of 15 A per connected electric swing clamp. When operating several swing clamps at the same time, the line is to be enlarged correspondingly. The electronic control has to be supplied by a separate power supply (24 V DC / 100 mA).
Integrated control
The electronic control for the DC motor is on a board in the housing of the electric swing clamp.
After removal of the protection cover for example the clamping force can be adjusted.
Video
Products (20)
Loading…
| Item no. | CAD data | body design | position monitoring | max. clamping force [kN] | metallic wiper | |
|---|---|---|---|---|---|---|
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
|
Loading…
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
without
swing angle [°]
swing direction
none
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
without
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
without
swing angle [°]
swing direction
none
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
with
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
with
swing angle [°]
swing direction
none
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
without
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
with
swing angle [°]
swing direction
none
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
with
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
without
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
without
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
without
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
with
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
with
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
without
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
with
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
with
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
without
swing angle [°]
90
swing direction
cw
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
without
Item no.
body design
top flange
position monitoring
with
max. clamping force [kN]
7.9
metallic wiper
without
swing angle [°]
90
swing direction
cw
swing stroke [mm]
3
total stroke [mm]
26
clamping arm seat
cone 1:10
code class
IP 67
nominal voltage [VDC]
24
camping force control
with
axial pull force [kN]
3 - 9
clamping time [s]
usable clamping stroke [mm]
20
max. clamping time [s]
3
IO-Link
with
Accessories (9)
| Item no. | CAD data | Description |
|---|---|---|
|
Item no.
|
CAD data
|
Description
Metallic wiper
for 1835-XXX
for piston rod Ø 36 mm
as per data sheet B1.8310
|
|
Item no.
|
CAD data
|
Description
Clamping arm, complete for 18X5-XXX
with thread, material: 42CrMo4
max. 200 bar, as per data sheet B1.880
|
|
Item no.
|
CAD data
|
Description
Double clamping arm assembly, complete for 18X5-XXX
with carrier, material: GGG-40
max. 500 bar, as per data sheet B1.880
|
|
Item no.
|
CAD data
|
Description
Carrier, complete for 18X5-XXX
with threaded bolt and spring clamping elements
material: C 45
as per data sheet B1.880
|
|
Item no.
|
CAD data
|
Description
Cable socket Hirschmann CA3LD
as per data sheet B1.8310
|
|
Item no.
|
CAD data
|
Description
Cable socket Binder 423 12 POL.
as per data sheet B1.8310
|
|
Item no.
|
CAD data
|
Description
Nut M28 x 1.5 mm
as per data sheet B1.880
|
|
Item no.
|
CAD data
|
Description
Clamping arm blank for 18X5-XXX
high alloy steel1000....1200 N/mm2
as per data sheet B1.881
|
|
Item no.
|
CAD data
|
Description
Clamping arm, complete for 18X5-XXX
without thread, material: 42CrMo4
max. 200 bar, as per data sheet B1.880
|
Loading…
Registration
New here?
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Login
Welcome back
Welcome back! Log in to your already existing user account.
Loading…
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.
Loading…
An unexpected error has occurred. Please reload the page or try again later.