Threaded-body cylinders
max. operating pressure 500 bar
Double-acting threaded-body cylinders are used when the return stroke must be effected in a certain time, e.g. with clock-pulse-controlled devices.
Of course they can also generate pulling forces.
These double-acting cylinders allow a space saving installation into the fixture body and therefore a hosefree oil supply. The double-wiper protects the piston and enables sealing with very little leakage. Sealing of the cylinders in the fit hole is made by two O-ring / support-ring combinations. Tightening of the cylinder can be made by a pin-type face spanner as per DIN 3116, so the collar can be immersed into the device, if necessary.
Item no. | CAD data | stroke [mm] | functioning | piston diameter [mm] | rod diameter [mm] | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Double-acting threaded-body cylinders in a multiple clamping bar for a welding fixture. Contact bolt with coupling pin (see data sheet G3.800)
Double-acting threaded-body cylinders as pull-type cylinders for a multiple clamping fixture to mill a wrench flat.
Injection mould
Cycle (portrayed in simplified terms):
1. Mould closed, substance injected
2. Threaded-body cylinder (5) moves out of the mould
3. Mould opens (the slide operates, the nozzle is free)
4. Workpiece will be removed from mould
5. Mould closes
6. Threaded-body cylinder (5) moves into the mould
1. New cycle
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.