Workholding
Contact
Series
F9.734

Pressure Switches

hydraulic-electronic signal converter, optionally with Teach-In function
2 switching outputs / 1 analogue output (optional), pressure range 5 to 600 bar
Pressure Switches
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
F9.734 Pressure Switches

These pressure switches measure the pressure in hydraulic systems and convert it into electrical signals.
All devices are provided with 2 outputs. While output 1 is a freely programmable switching output, output 2 can be selected as analogue output, switching output or alarm output. The switching and reset points, the output logic and time delays can be programmed through the membrane keyboard. Display and analogue output are equipped with adjustable damping for dynamic measurements.

Versions
There are 2 different versions, which differ in the type of adjustment option.
Pressure switch with classic parameterisation
Part no.  9740 049A

The desired switching and reset points are entered using a classic 3-button control panel.
This version can be parameterised conventionally for all applications, independent of the pressurisation of the pressure switch. 
Pressure switch with TEACH-IN function
Part no.  9740 050A

With the Teach-In procedure, a present pressure is stored in the pressure switch by pressing a button (Enter/Set button). This pressure value corresponds to the operating pressure.
The pressure switch automatically calculates the optimum switching and reset point for output 1 (e.g.  pump control/sequence control) and output 2 (e.g. machine control / release).
It is useful to adjust the operating pressure with the pressure relief valve. Detailed instructions can be found in the operating manual BA 9734.


Advantages
● Sturdy stainless steel piezoma cell
 ● Two PNP transistor switching outputs
 ● Analogue output with adjustable start and end point
 ● 4 x 7 segment LED display
 ● Continuous ACTUAL pressure display
 ● Accuracy < ± 0.1 % of the final value
 ● Optionally with teach-in function
 ● Any mounting position
 ● Operating and display panel can be rotated by 350°
 ● Display rotatable by 180°
 ● Remanent cycle counter
 ● Keyboard lock
 ● Switch-on and switch-off delay separately adjustable
 ● Self-monitoring function: Overload, cable break and sensor function
 ● Fast pressure peak detection 500 measurements per second
 ● LED display for switching contact status
 ● Many helpful additional functions

Products (2)
Loading…
type
Electronic pressure switch (2)
functioning
pressure adjustment range [bar]
5 – 600 (2)
electrical supply
12 - 32 VDC (2)
Item no. CAD datatypefunctioningpressure adjustment range [bar]electrical supply
Item no.
CAD data
type
Electronic pressure switch
functioning
with classic parameterisation
pressure adjustment range [bar]
5 – 600
electrical supply
12 - 32 VDC
Properties
Item no.
CAD data
type
Electronic pressure switch
functioning
with teach-in function
pressure adjustment range [bar]
5 – 600
electrical supply
12 - 32 VDC
Properties
Loading…
Item no.
type
Electronic pressure switch
functioning
with classic parameterisation
pressure adjustment range [bar]
5 – 600
electrical supply
12 - 32 VDC
Item no.
type
Electronic pressure switch
functioning
with teach-in function
pressure adjustment range [bar]
5 – 600
electrical supply
12 - 32 VDC
Accessories (2)
Item no. CAD data Description
Item no.
CAD data
Description
Cable socket M12x1, angled shielded cable cable length approx. 5 m 4 wires Lif9YH11YH 4 x 0.34 mm² sheat Ø 5.1 mm as per data sheet F9.733
Item no.
CAD data
Description
Cable socket M12x1, angled Cable length approx. 2 m as per data sheet F9.734
Loading…