Workholding Systems HILMA.SCS

clamping against the fixed jaw
mechanically or hydraulically operated
jaw widths 80 and 120 mm

Downloads

Catalogue sheet

DE EN FR IT

Operating instructions

Information Series

Further information
HILMA.SCS - www.stark-roemheld.com/hilma-scs

Description

Clamping system SCS

clamping against the fixed jaw
mechanically or hydraulically operated
jaw widths 80 and 120 mm

The clamping systems of the series HILMA.SCS are particularly suitable for use on 5-axis machining centres. Thanks to the compact design, the risk of collisions of the machine spindle with the clamping system is minimised. An improved accessibility to small workpieces is achieved by moving the fixed jaw.

The combined use of clamping systems of the series HILMA.SCS and the rapid change block Quintus provides additional benefits: On the one hand the important distance to the machine table is created, on the other hand setups can be transferred from internal to external and thus the machine running time can be prolonged. This is made by creating a defined interface for the quick change to other clamping systems, for example on three-jaw chucks.
The extensive range of jaws allows the use of the HILMA.SCS clamping systems for a multitude of machining operations. The clamping systems of the series HILMA.SCS is available as a mechanical or hydraulic system, depending on the requirements.

Special benefits

collision-free tool paths
good protection against swarf by covered lead screw and guideway
easy clamping with torque wrench or hydraulically
flexible applications, extensive accessories and range of clamping jaws

Products (6)

Number

Item no.	CAD data	type	stroke [mm]	operation	max. clamping force [kN]
Item no. 946720101	CAD data /	type HILMA.SCS Kompakt	stroke [mm] 35	operation mechanical	max. clamping force [kN] 25	Properties
Item no. 946720201	CAD data /	type HILMA.SCS	stroke [mm] 49	operation mechanical	max. clamping force [kN] 25	Properties
Item no. 946730101	CAD data /	type HILMA.SCS Kompakt	stroke [mm] 60	operation mechanical	max. clamping force [kN] 40	Properties
Item no. 946730201	CAD data /	type HILMA.SCS	stroke [mm] 116	operation mechanical	max. clamping force [kN] 40	Properties
Item no. 946820101	CAD data	type HILMA.SCS H	stroke [mm] 45	operation hydraulic	max. clamping force [kN] 21	Properties
Item no. 946830101	CAD data /	type HILMA.SCS H	stroke [mm] 50	operation hydraulic	max. clamping force [kN] 37.5	Properties

Accessories (3)

Number

Item no.	CAD data	Description
Item no. 805300023	CAD data /	Description Plug-in connector Ø12 x 19 mm as per data sheet WS 5.450Z
Item no. 946726903	CAD data	Description Fine step reversible jaw for HILMA.SCS 80 hardened and ground jaw width 80/80 mm as per data sheet WS 5.460Z
Item no. 946736903	CAD data /	Description Fine step reversible jaw for HILMA.SCS 120 hardened and ground jaw width 120/120 mm as per data sheet WS 5.460Z

Application examples

Super compact clamp HILMA.SCS 120 H

Three hydraulically-operated clamping systems "HILMA.SCS 120 H" on a 5-axis machining centre. The structure is flexible on a common base plate, the individual systems can be adapted by simple movement to different workpiece dimensions. The shown system uses special jaws with hard-metal coating, Clamping and unclamping are made by a valve with turning knob, alternatively, operation can be effected by foot switch or by the machine control. The connection to the machine hydraulics allows the program-controlled regulation of the clamping force.

Super compact clamp HILMA.SCS 120 H

The use of four hydraulic clamping system HILMA.SCS H 120 arranged star-shaped on a change pallet for machining on a 5-axis machine. The shown system uses special jaws with hard-metal coating, Clamping and unclamping are made by a valve with turning knob, alternatively, operation can be effected by foot switch or by the machine control. The hydraulic system is supplied with pressure oil through deep-hole drilled channels in the base plate.