Pneumatic swing clamp
double acting
max. operating pressure 7 bar
Application
Pneumatic swing clamps are used for applications which require only low clamping forces. The installed magnetic piston allows monitoring of clamping and unclamping position.
Description
When pressurising the element, the clamping arm swings and lowers by 90° to the clamping position and then lowers to the clamping point.
The position monitoring gives the required information regarding the position of the piston, but not regarding the position of the clamping arm.
Monitoring is made by electronic sensors (see accessory) which detect the magnetic field of the magnetic piston. The switching points can be continuously adjusted by displacement of the magnetic sensors.
Installation
On fixtures flange-type swing clamps or threaded versions with corresponding collar nuts can be easily adjusted to different workpiece heights.
Air supply can be effected via connection threads or drilled channels at the bottom of the flange.
Material
The swing clamps are supplied in corrosion resistant quality. Guide bushing, housing, piston, and flange are made of hardcoated aluminium.
The piston rod is made of corrosion resistant steel.
Important notes
Operating of these pneumatic elements has to be effected with an additional service unit in order to guarantee that the clamping elements are supplied with correctly prepared compressed air.
Operating conditions, tolerances and other data see data sheet A 0.100.
Item no. | CAD data | functioning | piston diameter [mm] | rod diameter [mm] | max. operating pressure [bar] | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Item no. | CAD data | Description |
---|---|---|
Item no.
|
CAD data
|
Description
Clamping arm 42 mm
for 1873-106/-206
as per data sheet J7.202
|
Item no.
|
CAD data
|
Description
Clamping arm 52 mm
for 1874-106/-206
as per data sheet J7.202
|
Item no.
|
CAD data
|
Description
Clamping arm 58 mm
for 1875-106/-206
as per data sheet J7.202
|
Item no.
|
CAD data
|
Description
Clamping arm 68 mm
for 1876-106/-206
as per data sheet J7.202
|
Item no.
|
CAD data
|
Description
Clamping arm 80 mm
for 1877-106/-206
as per data sheet J7.202
|
Item no.
|
CAD data
|
Description
O-ring 7 x 1.5 mm, NBR
as per data sheet B1.5091
|
Item no.
|
Description
O-ring 4.47 x 1.78 mm
as per data sheet C2.9512
|
|
Item no.
|
CAD data
|
Description
Flanged nut M40 x 1.5 mm
as per data sheet J7.201
|
Item no.
|
CAD data
|
Description
Flanged nut M60 x 1.5 mm
as per data sheet J7.201
|
Item no.
|
CAD data
|
Description
Flanged nut M52 x 1.5 mm
as per data sheet J7.203
|
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.