Swing clamp with pendulum eye or fork head
reinforced swing mechanism without overload protection device
double acting, max. operating pressure 500/160 bar
Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
The version with pendulum eye or fork head allows simultaneous clamping of two work pieces with half clamping force.
The hydraulic swing clamp is a double-acting pull-type cylinder where a part of the total stroke is used to swing the piston.
The piston end of this swing clamp is designed as pendulum eye or fork head. By means of a double clamping arm 2 workpieces can be clamped at the same time.
For both versions a springy element is required in order to maintain the double clamping arm in the unclamped position in horizontal position.
The sturdy pendulum eye can transmit high clamping forces up to a max. operating pressure of 500 bar.
The double clamping arm has to be dimensioned according to the load.
The fork head allows a max. operating pressure of 160 bar.
Advantageous is the fact that relatively simple clamping arms can be manufactured from flat materials.
Item no. | CAD data | functioning | piston diameter [mm] | rod diameter [mm] | max. pulling force [kN] | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Item no. | CAD data | Description |
---|---|---|
Item no.
|
Description
Metallic wiper, complete
for rod diameter 32 mm
as per data sheet B1.852
|
|
Item no.
|
CAD data
|
Description
Metallic wiper, complete
for rod diameter 20 mm
as per data sheet B1.852
|
Item no.
|
CAD data
|
Description
Pneumatic position monitoring, complete
for 1895-XXX-VMX35
as per data sheet B1.8801
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
with standard switch and angle plug
for 1895-XXX-VMX35
as per data sheet B1.8801
|
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.