Workholding
Contact
Series
B1.8500

Swing clamp with reinforced swing mechanism

Position monitoring optional: pneumatically integrated / electrically attachable
Top flange type, double acting, max. operating pressure 70 bar
Swing clamp with reinforced swing mechanism
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.8500 Swing clamp with reinforced swing mechanism

Position monitoring optional: pneumatically integrated / electrically attachable
Top flange type, double acting, max. operating pressure 70 bar

Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
This series obtains very high clamping forces already at 70 bar and can directly be connected to the low-pressure hydraulics of the machine tool. An additional power unit for power workholding is no longer necessary.
With the reinforced swing mechanism and the optional position monitoring these swing clamps are particularly suitable for:

  • Automatic manufacturing systems with very short cycle times
  • Clamping fixtures with workpiece loading by handling systems
  • Transfer lines
  • Test systems for motors, gears and axes
  • Assembly lines
  • Special machine tools

The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston.
Due to the reinforced swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading and unloading or during clamping.
The angle position of the clamping arm is fixed with a dowel pin.
The FKM  wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.
The version with extended switch rod is provided for mounting of pneumatic or electrical position monitorings (accessory).

 

Advantages
● 4 sizes available
● Compact design partially recessible
● High clamping force already at 70 bar
● Extremely short clamping and unclamping times
● Accessory throttle valve, screw-in
● Indexing of clamping arm 
● Standard FKM wiper
● Metallic wiper optional
● Pneumatic position monitoring integrated for type 185XP, standard
● Electrical position monitoring for type 185XQ, available as accessory 
● Mounting position: any

Products (520)
Loading…
body design
top flange (520)
clamping arm seat
cone 1:10 (520)
clamping stroke [mm]
swing stroke [mm]
total stroke [mm]
swing angle [°]
swing direction
functioning
double acting (520)
piston diameter [mm]
rod diameter [mm]
max. pulling force [kN]
max. operating pressure [bar]
70 (520)
seals
NBR (520)
hydraulic ports
pipe thread and manifold connection with O-ring (520)
position monitoring
pressure range
low pressure (520)
extended piston rod
max. clamping force [kN]
swing mechanism
reinforced (520)
overload protection device
without (520)
query of
wiper material
Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
Properties
Loading…
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
16
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
16
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
16
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
16
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
45
swing direction
ccw
swing stroke [mm]
3.5
total stroke [mm]
11.5
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
45
swing direction
ccw
swing stroke [mm]
3.5
total stroke [mm]
11.5
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
45
swing direction
cw
swing stroke [mm]
3.5
total stroke [mm]
11.5
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
45
swing direction
cw
swing stroke [mm]
3.5
total stroke [mm]
11.5
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
60
swing direction
ccw
swing stroke [mm]
4.5
total stroke [mm]
12.5
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
60
swing direction
ccw
swing stroke [mm]
4.5
total stroke [mm]
12.5
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
60
swing direction
cw
swing stroke [mm]
4.5
total stroke [mm]
12.5
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
60
swing direction
cw
swing stroke [mm]
4.5
total stroke [mm]
12.5
wiper material
metal
clamping arm seat
cone 1:10
Accessories (135)
Item no. CAD data Description
Item no.
CAD data
/
Description
Metallic wiper, complete for series 1853 piston rod Ø 14 mm as per data sheet B1.8500
Item no.
CAD data
/
Description
Metallic wiper, complete for series 1854 piston rod Ø 22 mm as per data sheet B1.8500
Item no.
CAD data
/
Description
Metallic wiper, complete for series 1856 piston rod Ø 30 mm as per data sheet B1.8500
Item no.
CAD data
/
Description
Metallic wiper, complete for series 1857 piston rod Ø 36 mm as per data sheet B1.8500
Item no.
CAD data
Description
Electrical position monitoring for series 1853Q0XX for swing angle 0° or 90° with switch and plug as per data sheet B1.8500
Item no.
CAD data
Description
Electrical position monitoring for series 1853Q0XX for swing angle 15° with switch and plug as per data sheet B1.8500
Item no.
CAD data
Description
Electrical position monitoring for series 1853Q0XX for swing angle 20° with switch and plug as per data sheet B1.8500
Item no.
CAD data
Description
Electrical position monitoring for series 1853Q0XX for swing angle 25° with switch and plug as per data sheet B1.8500
Item no.
CAD data
Description
Electrical position monitoring for series 1853Q0XX for swing angle 30° with switch and plug as per data sheet B1.8500
Item no.
CAD data
Description
Electrical position monitoring for series 1853Q0XX for swing angle 35° with switch and plug as per data sheet B1.8500
Loading…