Series
B1.8500
Swing clamp with reinforced swing mechanism
Position monitoring optional: pneumatically integrated / electrically attachable
Top flange type, double acting, max. operating pressure 70 bar
Top flange type, double acting, max. operating pressure 70 bar
Information Series
Description
B 1.8500 Swing clamp with reinforced swing mechanism
Position monitoring optional: pneumatically integrated / electrically attachable
Top flange type, double acting, max. operating pressure 70 bar
Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
This series obtains very high clamping forces already at 70 bar and can directly be connected to the low-pressure hydraulics of the machine tool. An additional power unit for power workholding is no longer necessary.
With the reinforced swing mechanism and the optional position monitoring these swing clamps are particularly suitable for:
- Automatic manufacturing systems with very short cycle times
- Clamping fixtures with workpiece loading by handling systems
- Transfer lines
- Test systems for motors, gears and axes
- Assembly lines
- Special machine tools
The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston.
Due to the reinforced swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading and unloading or during clamping.
The angle position of the clamping arm is fixed with a dowel pin.
The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.
The version with extended switch rod is provided for mounting of pneumatic or electrical position monitorings (accessory).
Advantages
● 4 sizes available
● Compact design partially recessible
● High clamping force already at 70 bar
● Extremely short clamping and unclamping times
● Accessory throttle valve, screw-in
● Indexing of clamping arm
● Standard FKM wiper
● Metallic wiper optional
● Pneumatic position monitoring integrated for type 185XP, standard
● Electrical position monitoring for type 185XQ, available as accessory
● Mounting position: any
Products (520)
Loading…
| Item no. | CAD data | functioning | piston diameter [mm] | rod diameter [mm] | max. pulling force [kN] | |
|---|---|---|---|---|---|---|
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
|
Loading…
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
8
total stroke [mm]
16
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
8
total stroke [mm]
16
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
90
swing direction
cw
swing stroke [mm]
8
total stroke [mm]
16
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
pneumatic, integrated
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
without
max. clamping force [kN]
1.7
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
90
swing direction
cw
swing stroke [mm]
8
total stroke [mm]
16
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
accessory: electrical
pressure range
low pressure
clamping stroke [mm]
16
extended piston rod
with
max. clamping force [kN]
2
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
16
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
accessory: electrical
pressure range
low pressure
clamping stroke [mm]
16
extended piston rod
with
max. clamping force [kN]
2
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
16
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
accessory: electrical
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
with
max. clamping force [kN]
2
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
ccw
swing stroke [mm]
3.8
total stroke [mm]
11.8
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
accessory: electrical
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
with
max. clamping force [kN]
2
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
ccw
swing stroke [mm]
3.8
total stroke [mm]
11.8
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
accessory: electrical
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
with
max. clamping force [kN]
2
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
cw
swing stroke [mm]
3.8
total stroke [mm]
11.8
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
25
rod diameter [mm]
14
max. pulling force [kN]
2.3
max. operating pressure [bar]
70
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
accessory: electrical
pressure range
low pressure
clamping stroke [mm]
8
extended piston rod
with
max. clamping force [kN]
2
swing mechanism
reinforced
overload protection device
without
query of
piston: clamped and unclamped
swing angle [°]
15
swing direction
cw
swing stroke [mm]
3.8
total stroke [mm]
11.8
wiper material
metal
clamping arm seat
cone 1:10
Accessories (135)
| Item no. | CAD data | Description |
|---|---|---|
|
Item no.
|
Description
Metallic wiper, complete
for series 1853
piston rod Ø 14 mm
as per data sheet B1.8500
|
|
|
Item no.
|
Description
Metallic wiper, complete
for series 1854
piston rod Ø 22 mm
as per data sheet B1.8500
|
|
|
Item no.
|
Description
Metallic wiper, complete
for series 1856
piston rod Ø 30 mm
as per data sheet B1.8500
|
|
|
Item no.
|
Description
Metallic wiper, complete
for series 1857
piston rod Ø 36 mm
as per data sheet B1.8500
|
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1853Q0XX
for swing angle 0° or 90°
with switch and plug
as per data sheet B1.8500
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1853Q0XX
for swing angle 15°
with switch and plug
as per data sheet B1.8500
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1853Q0XX
for swing angle 20°
with switch and plug
as per data sheet B1.8500
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1853Q0XX
for swing angle 25°
with switch and plug
as per data sheet B1.8500
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1853Q0XX
for swing angle 30°
with switch and plug
as per data sheet B1.8500
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1853Q0XX
for swing angle 35°
with switch and plug
as per data sheet B1.8500
|
Loading…
Registration
New here?
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Login
Welcome back
Welcome back! Log in to your already existing user account.
Loading…
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.
Loading…
An unexpected error has occurred. Please reload the page or try again later.