Workholding
Contact
Series
B1.5100

Block Cylinders S

double acting, max. operating pressure 250 bar and 500 bar
use as punching cylinder max. 250 bar
Block Cylinders S
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.5100 Block Cylinders S

Hydraulic block cylinders are universally used for all linear movements with high force requirements and very small dimensions. The block cylinder S can withstand high mechanical and thermal loads.

Its preferred applications are:

  • Punching (Max. operating pressure 250 bar *) 
  • Deburring
  • Forming such as bending, riveting, stamping
  • In mould making for actuating core pullers and slides
  • In automatic manufacturing systems with very short cycle times

 

The double-acting function ensures high function safety as well as exactly calculable and repeatable stroke times.

The block cylinders S are equipped with the latest sealing technology, so that optimally adapted versions are available depending on the operating pressure (250 or 500 bar), temperature and hydraulic fluid. At the piston rod outlet, the dirt wipers are largely protected against swarf by the recessed installation.
All series are equipped with piston and rod guide rings which absorb side loads between the sliding components and prevent direct metal contact. 
This increases the service life and minimizes leakage. The admissible piston side load depends on the stroke and can be taken from the diagrams on page 5 of the catalogue sheet. The internal piston stops are of sturdy design. The admissible piston speed depends on the mass fixed to the piston and can be read in the diagram on page 5 of the catalogue sheet. 

*) Maximum operating pressure 250 bar Required for punching applications due to the high load caused by the cutting impact. Even with the high-pressure version (500 bar), the pressure must be limited to 250 bar. The advantage of this is the longer service life of the high-pressure seals.  

Video
Products (3200)
Loading…
type
block cylinder S (3200)
stroke [mm]
functioning
double acting (3200)
stroke end cushioning
without (3200)
piston diameter [mm]
rod diameter [mm]
seals
fixation
piston rod end
hydraulic ports
spherical bearing
without (3200)
max. operating pressure [bar]
position monitoring
without (3200)
material of the body
steel (3200)
max. force to push [kN]
max. force to pull [kN]
operating temperature [°C]
keyway
centring collar
anti-torsion device
without (3200)
stainless
no (3200)
Item no. CAD datatypestroke [mm]functioningstroke end cushioning
Item no.
CAD data
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder S
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
Properties
Loading…
Item no.
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
with
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 longitudinal holes
piston rod end
external thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
100
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 longitudinal holes
piston rod end
external thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
with
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 threads
piston rod end
internal thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 threads
piston rod end
internal thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
with
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 threads
piston rod end
external thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 threads
piston rod end
external thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
with
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 threads
piston rod end
internal thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder S
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
63
rod diameter [mm]
40
seals
FKM
fixation
4 threads
piston rod end
internal thread M27
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
155.8
max. force to pull [kN]
93
operating temperature [°C]
-20...+150
keyway
without
centring collar
with
anti-torsion device
without
stainless
no
Accessories (8)
Item no. CAD data Description
Item no.
CAD data
/
Description
O-ring 8 x 1.5 mm, FKM as per data sheet B1.5091
Item no.
CAD data
/
Description
O-ring 5 x 1.5 mm as per data sheet C2.320
Item no.
CAD data
Description
O-ring 7 x 1.5 mm, NBR as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 8 x 1.5 mm, NBR as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 10 x 2 mm, NBR as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 7 x 1.5 mm, FKM as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 10 x 2 mm, FKM as per data sheet B1.5091
Item no.
CAD data
/
Description
O-ring 5 x 1.5 mm - FKM as per data sheet F9.732
Loading…