Workholding
Workholding
Contact
Series
B1.853

Swing Clamps with Sturdy Swing Mechanism

Top flange, position monitoring optional
double acting, max. operating pressure 350 bar
Swing Clamps with Sturdy Swing Mechanism
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B1.853 Swing Clamps with Sturdy Swing Mechanism

Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
Due to the sturdy swing mechanism and the manifold possibilities of position monitoring these swing clamps are particularly suited for

  • Automatic manufacturing systems
  • Clamping fixtures with workpiece loading via handling systems
  • Transfer lines
  • Test systems for motors, gears and axes
  • Assembly lines
  • Special machine tools

The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The favourable area ratio (piston/piston rod) allows high clamping forces already at relatively low oil pressures.
Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading
or unloading. Also a collision during the clamping process is not critical.
When using high flow rates the swing speed is limited by installed throttle points. For connection via drilled channels, adjustable throttle valves can be screwed instead of the screw plugs. The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.

Video
Products (2030)
Loading…
functioning
double acting (2030)
piston diameter [mm]
rod diameter [mm]
max. pulling force [kN]
max. operating pressure [bar]
350 (2030)
seals
NBR (2030)
hydraulic ports
pipe thread and manifold connection with O-ring (2030)
body design
top flange (2030)
position monitoring
pressure range
high pressure (2030)
clamping stroke [mm]
extended piston rod
max. clamping force [kN]
swing mechanism
sturdy (2030)
overload protection device
without (2030)
query of
swing angle [°]
swing direction
swing stroke [mm]
total stroke [mm]
wiper material
clamping arm seat
cone 1:10 (2030)
Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
Properties
Loading…
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
23
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
23
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
23
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
swing direction
none
swing stroke [mm]
total stroke [mm]
23
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
15
swing direction
ccw
swing stroke [mm]
4.175
total stroke [mm]
16.175
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
15
swing direction
ccw
swing stroke [mm]
4.175
total stroke [mm]
16.175
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
15
swing direction
cw
swing stroke [mm]
4.175
total stroke [mm]
16.175
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
15
swing direction
cw
swing stroke [mm]
4.175
total stroke [mm]
16.175
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
20
swing direction
ccw
swing stroke [mm]
4.63
total stroke [mm]
16.63
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
20
swing direction
ccw
swing stroke [mm]
4.63
total stroke [mm]
16.63
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
20
swing direction
cw
swing stroke [mm]
4.63
total stroke [mm]
16.63
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
23
rod diameter [mm]
16
max. pulling force [kN]
7.5
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
without
pressure range
high pressure
clamping stroke [mm]
12
extended piston rod
without
max. clamping force [kN]
6
swing mechanism
sturdy
overload protection device
without
query of
without
swing angle [°]
20
swing direction
cw
swing stroke [mm]
4.63
total stroke [mm]
16.63
wiper material
metal
clamping arm seat
cone 1:10
Accessories (49)
Item no. CAD data Description
Item no.
CAD data
Description
Angle bracket, complete for series 1843 as per data sheet B1.852
Item no.
CAD data
Description
Angle bracket, complete for series 1844 as per data sheet B1.852
Item no.
CAD data
Description
Angle bracket, complete for series 1845, 1846 and 1847 as per data sheet B1.852
Item no.
CAD data
/
Description
Metallic wiper, complete for rod diameter 32 mm as per data sheet B1.852
Item no.
CAD data
/
Description
Metallic wiper, complete for series 1847 as per data sheet B1.853
Item no.
CAD data
/
Description
Metallic wiper, complete for rod diameter 16 mm as per data sheet B1.852
Item no.
CAD data
/
Description
Metallic wiper, complete for rod diameter 25 mm as per data sheet B1.852
Item no.
CAD data
Description
Metallic wiper, complete for rod diameter 20 mm as per data sheet B1.852
Item no.
CAD data
Description
Electrical position monitoring for series 1843B0XX/1843M0XX and 1844B0XX/1844M0XX with switch and plug as per data sheet B1.853
Item no.
CAD data
Description
Electrical position monitoring for series 1843B0XX/1843M0XX and 1844B0XX/1844M0XX without switch and plug as per data sheet B1.853
Loading…