Workholding
Contact
Series
B1.460

Threaded-body cylinders

single acting with spring return
max. operating pressure 500 bar
Threaded-body cylinders
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B1.460 Threaded-Body Cylinder

These threaded-body cylinders can be threaded directly into tapped holes in the fixture down to the hex-section of the cylinder body. Spacings between cylinders can be minimised when cylinders are arranged in a row, since the oil is fed through drilled passages in the fixture. 
Sealing is made with the supplied sealing ring at the bottom of the location hole.
A long piston guide in combination with an O-ring/back-ring seal provides trouble-free 
operation.

Products (15)
Loading…
stroke [mm]
functioning
single acting with spring return (15)
piston diameter [mm]
rod diameter [mm]
plunger piston (15)
max. force to push [kN]
max. pulling force [kN]
0 (15)
max. operating pressure [bar]
500 (15)
seals
NBR (15)
piston rod end
screw-in thread [mm]
wiper
without (15)
sealing of housing
sealing ring (15)
Item no. CAD datastroke [mm]functioningpiston diameter [mm]rod diameter [mm]
Item no.
CAD data
stroke [mm]
10
functioning
single acting with spring return
piston diameter [mm]
12
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
10
functioning
single acting with spring return
piston diameter [mm]
12
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
10
functioning
single acting with spring return
piston diameter [mm]
12
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
12
functioning
single acting with spring return
piston diameter [mm]
16
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
12
functioning
single acting with spring return
piston diameter [mm]
16
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
12
functioning
single acting with spring return
piston diameter [mm]
16
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
15
functioning
single acting with spring return
piston diameter [mm]
20
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
15
functioning
single acting with spring return
piston diameter [mm]
20
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
15
functioning
single acting with spring return
piston diameter [mm]
20
rod diameter [mm]
plunger piston
Properties
Item no.
CAD data
stroke [mm]
16
functioning
single acting with spring return
piston diameter [mm]
25
rod diameter [mm]
plunger piston
Properties
Loading…
Item no.
stroke [mm]
10
functioning
single acting with spring return
piston diameter [mm]
12
rod diameter [mm]
plunger piston
max. force to push [kN]
5.7
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
dome head
screw-in thread [mm]
M22x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
10
functioning
single acting with spring return
piston diameter [mm]
12
rod diameter [mm]
plunger piston
max. force to push [kN]
5.7
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
Internal thread
screw-in thread [mm]
M22x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
10
functioning
single acting with spring return
piston diameter [mm]
12
rod diameter [mm]
plunger piston
max. force to push [kN]
5.7
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
swivel contact bolt
screw-in thread [mm]
M22x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
12
functioning
single acting with spring return
piston diameter [mm]
16
rod diameter [mm]
plunger piston
max. force to push [kN]
10.1
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
dome head
screw-in thread [mm]
M26x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
12
functioning
single acting with spring return
piston diameter [mm]
16
rod diameter [mm]
plunger piston
max. force to push [kN]
10.1
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
Internal thread
screw-in thread [mm]
M26x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
12
functioning
single acting with spring return
piston diameter [mm]
16
rod diameter [mm]
plunger piston
max. force to push [kN]
10.1
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
swivel contact bolt
screw-in thread [mm]
M26x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
15
functioning
single acting with spring return
piston diameter [mm]
20
rod diameter [mm]
plunger piston
max. force to push [kN]
15.7
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
dome head
screw-in thread [mm]
M30x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
15
functioning
single acting with spring return
piston diameter [mm]
20
rod diameter [mm]
plunger piston
max. force to push [kN]
15.7
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
Internal thread
screw-in thread [mm]
M30x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
15
functioning
single acting with spring return
piston diameter [mm]
20
rod diameter [mm]
plunger piston
max. force to push [kN]
15.7
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
swivel contact bolt
screw-in thread [mm]
M30x1,5
wiper
without
sealing of housing
sealing ring
Item no.
stroke [mm]
16
functioning
single acting with spring return
piston diameter [mm]
25
rod diameter [mm]
plunger piston
max. force to push [kN]
24.6
max. pulling force [kN]
max. operating pressure [bar]
500
seals
NBR
piston rod end
dome head
screw-in thread [mm]
M38x1,5
wiper
without
sealing of housing
sealing ring
Accessories (15)
Item no. CAD data Description
Item no.
CAD data
Description
Connecting housing f. 1460-XXX M28 x 1,5 x 44 mm long 500 bar, see page B1.460
Item no.
CAD data
Description
Connecting housing f. 1461-XXX M32 x 1,5 x 49 mm long 500 bar, see page B1.460
Item no.
CAD data
Description
Connecting housing f. 1462-XXX M38 x 1,5 x 58 mm long 500 bar, see page B1.460
Item no.
CAD data
Description
Connecting housing f. 1463-XXX M45 x 1,5 x 59 mm long 500 bar, see page B1.460
Item no.
CAD data
Description
Connecting housing f. 1464-XXX M60 x 1,5 x 85 mm long 500 bar, see page B1.460
Loading…
Application examples
Application example 1

Multiple clamping fixture for clamping of small parts. The cylinders can be arranged in clamping bars or yokes.

Application example 2

This multiple clamping fixture is equipped with threaded-body cylinders with swivel contact bolts. The 3° incline of the threaded-body cylinders effects a low-clamping force of approx. 5 % of the clamping force. On plane clamping surfaces swivel contact bolts obtain little surface pressure on the effective points.

Application example 3

Workholding with the use of reversing levers is particularly suited for workpieces which have to be clamped high above the fixture base plate. The force-loop closed within a limited fixture component space eliminates bending forces from entering the fixture base plate. The reversing lever allows easy adaptation of the lever ratio to the clamping force required.