Threaded-body cylinders

single acting with spring return
max. operating pressure 500 bar

Downloads

Catalogue sheet

EN DE ES FR IT PL

Operating instructions

EN DE ES FR IT

Information Series

Description

B1.460 Threaded-Body Cylinder

These threaded-body cylinders can be threaded directly into tapped holes in the fixture down to the hex-section of the cylinder body. Spacings between cylinders can be minimised when cylinders are arranged in a row, since the oil is fed through drilled passages in the fixture.
Sealing is made with the supplied sealing ring at the bottom of the location hole.
A long piston guide in combination with an O-ring/back-ring seal provides trouble-free
operation.

Products (15)

Number

Item no.	CAD data	stroke [mm]	functioning	piston diameter [mm]	rod diameter [mm]
Item no. 1460000	CAD data	stroke [mm] 10	functioning single acting with spring return	piston diameter [mm] 12	rod diameter [mm] plunger piston	Properties
Item no. 1460001	CAD data	stroke [mm] 10	functioning single acting with spring return	piston diameter [mm] 12	rod diameter [mm] plunger piston	Properties
Item no. 1460010	CAD data	stroke [mm] 10	functioning single acting with spring return	piston diameter [mm] 12	rod diameter [mm] plunger piston	Properties
Item no. 1461000	CAD data	stroke [mm] 12	functioning single acting with spring return	piston diameter [mm] 16	rod diameter [mm] plunger piston	Properties
Item no. 1461001	CAD data	stroke [mm] 12	functioning single acting with spring return	piston diameter [mm] 16	rod diameter [mm] plunger piston	Properties
Item no. 1461010	CAD data	stroke [mm] 12	functioning single acting with spring return	piston diameter [mm] 16	rod diameter [mm] plunger piston	Properties
Item no. 1462000	CAD data	stroke [mm] 15	functioning single acting with spring return	piston diameter [mm] 20	rod diameter [mm] plunger piston	Properties
Item no. 1462001	CAD data	stroke [mm] 15	functioning single acting with spring return	piston diameter [mm] 20	rod diameter [mm] plunger piston	Properties
Item no. 1462010	CAD data	stroke [mm] 15	functioning single acting with spring return	piston diameter [mm] 20	rod diameter [mm] plunger piston	Properties
Item no. 1463000	CAD data	stroke [mm] 16	functioning single acting with spring return	piston diameter [mm] 25	rod diameter [mm] plunger piston	Properties

Accessories (51)

Number

Item no.	CAD data	Description
Item no. 3614237	CAD data	Description Contact bolt M20 x 22 mm with coupling pin max. 350 bar, as per data sheet G3.800

Application examples

Application example 1

Multiple clamping fixture for clamping of small parts. The cylinders can be arranged in clamping bars or yokes.

Application example 2

This multiple clamping fixture is equipped with threaded-body cylinders with swivel contact bolts. The 3° incline of the threaded-body cylinders effects a low-clamping force of approx. 5 % of the clamping force. On plane clamping surfaces swivel contact bolts obtain little surface pressure on the effective points.

Application example 3

Workholding with the use of reversing levers is particularly suited for workpieces which have to be clamped high above the fixture base plate. The force-loop closed within a limited fixture component space eliminates bending forces from entering the fixture base plate. The reversing lever allows easy adaptation of the lever ratio to the clamping force required.