Workholding
Contact
Series
B1.5094

Block cylinders

double acting, - max. operating pressure 500 bar
Block cylinders
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.5094 Block Cylinders

Double-acting block cylinders can be used universally for all hydraulically-operated linear movements.

  • Positioning
  • Clamping
  • Supporting
  • Locking
  • Bending
  • Riveting
  • Punching
  • Moving
  • Opening and closing
  • Locking and unlocking
  • Lifting and lowering
  • Pushing and pulling

 

The double-acting functioning allows a force generation in both axial directions (force to push and to pull). This guarantees a high function safety as well as exactly calculable and repetitive times required for the stroke.

Fixing possibilities

Block cylinders have cross holes and/or longitudinal holes for mounting. For mounting of the block cylinders internal threads can be provided instead of the through holes, optionally at the piston rod side or the bottom side.
As an alternative to a support, hydraulic block cylinders can be fitted in the housing with a keyway, which transfers the cylinder forces to the baseplate surface via a key.
 

internal thread
internal thread
keyway
keyway
Hydraulic connecting possibilities

Connection with pipe thread 

Manifold-mounting with O-ring sealing

Manifold-mounting connection K- with 2 mounting holes
Manifold-mounting connection L - with 4 mounting holes
Manifold-mounting connection S- with 4 mounting holes
Manifold-mounting connection B- with 4 mounting holes

Connection with pipe thread
Connection with pipe thread
Manifold-mounting connection K - Broad side with 2 mounting holes
Manifold-mounting connection K - Broad side with 2 mounting holes
Manifold-mounting connection L - Broad side with 4 mounting holes
Manifold-mounting connection L - Broad side with 4 mounting holes
Manifold-mounting connection S - Rod side with 4 mounting holes
Manifold-mounting connection S - Rod side with 4 mounting holes
Manifold-mounting connection B -  Bottom side with 4 mounting holes
Manifold-mounting connection B - Bottom side with 4 mounting holes
Intermediate strokes

Stroke limitation by distance bushing: Economical and quickly supplied intermediate strokes
A distance bushing is inserted on the piston rod side in the standard cylinder with the next largest stroke and fastened inside the housing. That means the piston can no longer complete the extending stroke and the stroke is restricted by this internal stop, dependent on the length of the bushing.

stroke limitation by distance bushing
stroke limitation by distance bushing
Products (841)
Loading…
type
block cylinder (841)
stroke [mm]
functioning
double acting (841)
stroke end cushioning
without (841)
piston diameter [mm]
rod diameter [mm]
seals
fixation
piston rod end
hydraulic ports
spherical bearing
without (841)
max. operating pressure [bar]
500 (841)
position monitoring
without (841)
material of the body
steel (841)
max. force to push [kN]
max. force to pull [kN]
operating temperature [°C]
keyway
centring collar
without (841)
anti-torsion device
without (841)
stainless
no (841)
Item no. CAD datatypestroke [mm]functioningstroke end cushioning
Item no.
CAD data
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
Properties
Loading…
Item no.
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
125
rod diameter [mm]
80
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M48
hydraulic ports
pipe thread
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
613.5
max. force to pull [kN]
362
operating temperature [°C]
-20...+200
keyway
with
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
125
rod diameter [mm]
80
seals
FKM
fixation
cross holes
piston rod end
internal thread M48
hydraulic ports
O-ring manifold-mounting connection L
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
613.5
max. force to pull [kN]
362
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
125
rod diameter [mm]
80
seals
FKM
fixation
cross holes
piston rod end
internal thread M48
hydraulic ports
O-ring manifold-mounting connection L
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
613.5
max. force to pull [kN]
362
operating temperature [°C]
-20...+200
keyway
with
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
125
rod diameter [mm]
80
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M48
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
613.5
max. force to pull [kN]
362
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
200
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
125
rod diameter [mm]
80
seals
FKM
fixation
4 threads
piston rod end
internal thread M48
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
613.5
max. force to pull [kN]
362
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
160
rod diameter [mm]
100
seals
NBR
fixation
cross holes
piston rod end
internal thread M56
hydraulic ports
pipe thread
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
1005
max. force to pull [kN]
612.6
operating temperature [°C]
-30...+100
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
160
rod diameter [mm]
100
seals
NBR
fixation
cross holes
piston rod end
internal thread M56
hydraulic ports
pipe thread
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
1005
max. force to pull [kN]
612.6
operating temperature [°C]
-30...+100
keyway
with
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
160
rod diameter [mm]
100
seals
NBR
fixation
cross holes
piston rod end
internal thread M56
hydraulic ports
pipe thread
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
1005
max. force to pull [kN]
612.6
operating temperature [°C]
-30...+100
keyway
with
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
160
rod diameter [mm]
100
seals
NBR
fixation
cross holes
piston rod end
internal thread M56
hydraulic ports
O-ring manifold-mounting connection K
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
1005
max. force to pull [kN]
612.6
operating temperature [°C]
-30...+100
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
40
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
160
rod diameter [mm]
100
seals
NBR
fixation
cross holes
piston rod end
internal thread M56
hydraulic ports
O-ring manifold-mounting connection K
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
without
material of the body
steel
max. force to push [kN]
1005
max. force to pull [kN]
612.6
operating temperature [°C]
-30...+100
keyway
with
centring collar
without
anti-torsion device
without
stainless
no
Accessories (8)
Item no. CAD data Description
Item no.
CAD data
/
Description
O-ring 8 x 1.5 mm, FKM as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 7 x 1.5 mm, NBR as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 8 x 1.5 mm, NBR as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 10 x 2 mm, NBR as per data sheet B1.5091
Item no.
CAD data
/
Description
O-ring 12 x 2 mm, NBR as per data sheet B1.5094
Item no.
CAD data
Description
O-ring 7 x 1.5 mm, FKM as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 10 x 2 mm, FKM as per data sheet B1.5091
Item no.
CAD data
/
Description
O-ring 12 x 2 mm, FKM as per data sheet B1.5094
Loading…
Technology
Design of block cylinders
  • Double acting
  • Single acting
design of block cylinders - double acting
design of block cylinders - double acting
design of block cylinders - single acting
design of block cylinders - single acting