Workholding
Contact
Series
B1.480

Hydraulic threaded-body clamping modules

pull-type, single and double acting
with protection against torsion, max. operating pressure 500 bar
Hydraulic threaded-body clamping modules
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.480 Hydraulic threaded-body clamping module 

The hydraulic threaded-body clamping module pull-type was developed for screwing in into:

  • Standardized housings  
  • Fixture bodies or manifold blocks  
  • Fixture base plates or intermediate plates for pallets or machine tool tables  
Products (2)
Loading…
type
hydraulic clamping module (2)
functioning
single and double acting (2)
max. operating pressure [bar]
500 (2)
hydraulic ports
for drilled channels (2)
centring function
without centring (2)
body design
threaded-body type (2)
min. clamping diameter [mm]
depending on the location (2)
max. clamping diameter [mm]
depending on the location (2)
max. low-clamping force [kN]
24.5 (2)
seal
NBR (2)
seat check
without (2)
connection for positive air pressure protection
without (2)
Item no. CAD datatypefunctioningmax. operating pressure [bar]hydraulic ports
Item no.
CAD data
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
Properties
Loading…
Item no.
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
centring function
without centring
body design
threaded-body type
min. clamping diameter [mm]
depending on the location
max. clamping diameter [mm]
depending on the location
max. low-clamping force [kN]
24.5
seal
NBR
seat check
without
connection for positive air pressure protection
without
Item no.
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
centring function
without centring
body design
threaded-body type
min. clamping diameter [mm]
depending on the location
max. clamping diameter [mm]
depending on the location
max. low-clamping force [kN]
24.5
seal
NBR
seat check
without
connection for positive air pressure protection
without
Application examples
Application example 1

Installation of hydraulic clamping modules in the base plate of a multiple clamping fixture

Transmission of the clamping force is made by an elastomer spring element
Ø 50 x Ø 17 x 32 mm high.
The workpieces are centered by the shoulder at the flange. In such an arrangement for clamping neither a wrench is required nor a C-washer has to be handled.