• My requests (0)
    You do not currently have any products added to your request.
    All requests
Workholding
Search
All results
Contact
+49 (0) 6405 - 890 Call now
info@roemheld.de Contact now
Series
B1.480

Hydraulic threaded-body clamping modules

pull-type, single and double acting
with protection against torsion, max. operating pressure 500 bar
Hydraulic threaded-body clamping modules
Downloads
Catalogue sheet
ENDEESFRIT
Operating instructions
Information Series
Description
B 1.480 Hydraulic threaded-body clamping module 

The hydraulic threaded-body clamping module pull-type was developed for screwing in into:

  • Standardized housings  
  • Fixture bodies or manifold blocks  
  • Fixture base plates or intermediate plates for pallets or machine tool tables  
Products (2)
body design
threaded-body type (2)
type
hydraulic clamping module (2)
functioning
single and double acting (2)
max. operating pressure [bar]
500 (2)
hydraulic ports
for drilled channels (2)
centring function
without centring (2)
min. clamping diameter [mm]
depending on the location (2)
max. clamping diameter [mm]
depending on the location (2)
max. low-clamping force [kN]
24.5 (2)
seal
NBR (2)
seat check
without (2)
connection for positive air pressure protection
without (2)
Item no. CAD datatypefunctioningmax. operating pressure [bar]hydraulic ports
Item no.
1574811
CAD data
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
Properties
Item no.
1574812
CAD data
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
Properties
Item no.
1574811
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
centring function
without centring
body design
threaded-body type
min. clamping diameter [mm]
depending on the location
max. clamping diameter [mm]
depending on the location
max. low-clamping force [kN]
24.5
seal
NBR
seat check
without
connection for positive air pressure protection
without
Item no.
1574812
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
centring function
without centring
body design
threaded-body type
min. clamping diameter [mm]
depending on the location
max. clamping diameter [mm]
depending on the location
max. low-clamping force [kN]
24.5
seal
NBR
seat check
without
connection for positive air pressure protection
without
Application examples
Application example 1

Installation of hydraulic clamping modules in the base plate of a multiple clamping fixture

Transmission of the clamping force is made by an elastomer spring element
Ø 50 x Ø 17 x 32 mm high.
The workpieces are centered by the shoulder at the flange. In such an arrangement for clamping neither a wrench is required nor a C-washer has to be handled.

Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.